S-tune Suspension System
 A stable form with a low-down of approximately 20 mm front and back was achieved. Repeated actual vehicle testing was used to achieve both sporty driving with suppressed vehicle movement and a pleasant ride feeling. The feeling of stability increases further during high-speed driving, and the increased steering response during cornering suppresses the roll speed to achieve handling with controllability.
A combined setting was used for the suspension and stabilizer to take both the ride feel and driving stability to the next dimension.
|
|
|
|
Combination Meters for MT and AT Vehicles
The same design as for the standard equipment meters was used for the scales and panel design to prevent any feeling of unfamiliarity. The speed meter shows the full scale up to 300km/h to give a sporty feeling. Miles are also shown on the speed meter to increase the global image of the Fairlady Z.
■Meter housing assembly replacement type
■The NISMO logo is placed on the tachometer scale
|
|
Aero Kit - Front Bumper Spoiler
 The downforce was increased on both the front and the back to increase driving stability during high-speed driving. The front and rear downforce in particular were increased to improve tire road contact and driving stability. Importance was placed on aerodynamic testing verified in wind tunnel tests. Both of these products are unpainted and are finished with white gel coat manufactured by FRP.
|
|
18 inch Forged Aluminum Wheel LM GT4 (For Front)
18" x 8.5J (8.2Kg)
18 inch Forged Aluminum Wheel LM GT4 (For Rear)
18" x 9.5J (8.6Kg)
19 inch Forged Aluminum Wheel LM GT4 (For Front)
19" x 8.5J (9.25kg)
19 inch Forged Aluminum Wheel LM GT4 (For Rear)
19" x 9.5J (9.35kg)
Center Cap Flat Type
LM GT4 is a cast one-piece model that was designed to be "lightweight", "highly rigid", and "high strength" to get the most out of the NISMO sports suspension series (G-ATTACK) performance.
Center Cap Standard Type (with Rays logo)
Center Cap Standard Type (without logo)
Wheel Nut
Wheel Wrench Adapter
Fender Mall
Air Valve Cap
|
|
|
|
